Dual Voltage 52MM Gauge The REDARC 52mm dual voltage gauge is ideal for monitoring battery systems mounted in 4WD's, Campers, Caravans, Motorhomes and other similar vehicle applications. The LCD/ LED display allows you to monitor the charging performance of both your main and auxiliary batteries. In the event of an alternator or system failure, the voltage reading on the gauge will be low and drop as the battery discharges. In the event of an overcharge condition, the voltage reading will climb above its normal zone. The G52-VVA gauge also has pre-set alert levels (<11V and >16V) to notify you of these situations by changing the gauge backlight colour to either amber or red, and initiate an audible beep when the vehicle's ignition is on. Current Sensor* The G52-VVA gauge is also equipped with an optional 100A rated current display that monitors the amount of current to or from your main or auxiliary battery. This device can be fitted around the earth connection of the main or auxiliary battery. You will need to purchase the REDARC Hall effect current sensor (GS-AMPS) to equip the gauge with this function. Enhanced Lighting Controller* REDARC recommends the purchase of an Enhanced Lighting Controller (GA-ELC) with this gauge. The GA-ELC is designed to enhance the lighting of your REDARC gauges as only one required for a set. It is to be used when you do not have a dimming circuit to connect your gauge to or the dimming circuit in your vehicle does not dim the REDARC gauge to your liking. The GA-ELC also allows you to program nighttime brightness and colour of your REDARC gauges, including dimming if connected to a dash dimmer. Once programmed your gauges will change colour when turning on your park lights and back to a daylight colour when you turn them off. The GA-ELC is also 24 volt capable. Mounting Cup GH-CUP Features Satin Chrome Bezel 13 Selectable Backlight Colours Multiple alert levels with amber or red backlight and audible beep - Alerts when Voltage drops below 11V or climbs above 16V. Display illuminates when park lights are turned on so you can check battery voltages and discharge or charge current without turning on the ignition. If fitting more than one REDARC gauge, a communications link can be connected between the gauges to change the backlight colour of all at once. Warranty 2 Years Sensor (Optional) GS-AMPS Standby Current Draw 30mA Input (Operating) Voltage 6 - 16V Height (mm) 42 Weight (kg) 0.05 Warranty 2 Years Sensor (Optional) GS-AMPS Standby Current Draw 30mA Input (Operating) Voltage 6 - 16V Height (mm) 42 Weight (kg) 0.05

Be The First To Review This Product!

Help other ozled users shop smarter by writing reviews for products you have purchased.

Write a product review

Be The First To Review This Product!

Help other OzLED customers shop smarter by writing reviews for products you have purchased.





OzLED Members

FREE TO JOIN
Membership is FREE, Members Save big for nothing
DON’T PAY RETAIL
Members have site-wide pricing discounts on all products!
MEMBER ONLY SALES
Member only sales with up to 75% OFF and exclusive Member only giveaways
MEMBER UPDATES
Members will be updated on new and upcoming sales before anyone else

Follow us on Social Media