ONLINE ORDERS ONLY
Dispatch or Collect 3-5 business days
Free Shipping on this item*
Buy In Bulk & Save!
For orders over 5 units:
Pay just $585.67
Notify me when back in stock
Notify me when back in stock
Please tick this box to proceed.
Free Shipping $99+*
Locally Owned Business in Brisbane
Afterpay Available. Shop Now. Pay Later
Redarc Boost Pressure & Exhaust Gas Temperature Gauge 52mm Diameter With Optional Temperature Display
EGT & Boost Pressure 52MM Gauge The REDARC 52mm EGT & boost pressure gauge is a must for your diesel turbocharged vehicle. The G52-BET is used to monitor the exhaust gas temperature (EGT) of turbo-equipped vehicles in conjunction with a pyrometer probe. EGT is an indication of how hot the combustion process is in a vehicles cylinders. Excessive EGT can cause engine or turbocharger damage. Many conditions can result in excessive EGT (i.e. too much fuel or not enough air) and are made worse when a vehicle is pulling a heavy load, climbing or running at continuous high speeds. The boost pressure function monitors manifold air pressure and is used to ensure excessive pressure is not generated. By monitoring boost, you are able to keep the vehicle's engine components in the proper power range to achieve the most performance from your vehicle. The gauge is supplied with a “K” type EGT sensor and electronic boost MAP sensor interface. The boost has a peak hold function with a display range from 0- 35 PSI and programmable alert level between 10 and 30 PSI. The EGT function also has a peak hold function with a range from 275 to 800 °C and is programmable between 500 and 800 °C. The EGT probe has a 1/8” NPT compression fitting and is supplied with a weld in mounting bung. Temperature Sensor* The G52-BET gauge also supports one of four optional temperature sensors. You will need to purchase one of the following REDARC temperature sensors to equip the gauge with this function: GS-UT-80: An NTC temperature sensor in a plastic housing for measuring cabin, fridge or outside temperature. Range is -20°C ~ + 80 °C. This sensor is supplied with a 6 metre extension cable. GS-UT-120: An NTC temperature sensor in a metal copper housing with 6mm diameter mounting hole. Range is -20~+120 °C. This sensor is supplied with a 6 metre extension cable. GS-OWT1-4: Water or Oil temperature sender. 1/4 NPT threaded. Designed to measure from -20~ +170°C. Supplied with 3 metre extension cable. GS-OWT1-8: Water or Oil temperature sender. 1/8 NPT threaded. Designed to measure from -20~ +170°C. Supplied with 3 metre extension cable. Enhanced Lighting Controller* REDARC recommends the purchase of an Enhanced Lighting Controller (GA-ELC) with this gauge. The GA-ELC is designed to enhance the lighting of your REDARC gauges as only one required for a set. It is to be used when you do not have a dimming circuit to connect your gauge to or the dimming circuit in your vehicle does not dim the REDARC gauge to your liking. The GA-ELC also allows you to program nighttime brightness and colour of your REDARC gauges, including dimming if connected to a dash dimmer. Once programmed your gauges will change colour when turning on your park lights and back to a daylight colour when you turn them off. The GA-ELC is also 24 volt capable. Mounting Cup GH-CUP Features Satin Chrome Bezel 13 Selectable Backlight Colours EGT and boost peak hold functions Multiple programmable alert levels with amber or red backlight and audible beep Display illuminates when park lights are turned on so you can check exhaust gas temperature and boost pressure without turning on the ignition. If fitting more than one REDARC gauge, a communications link can be connected between the gauges to change the backlight colour of all at once. Kit Contents: 52mm gauge with wiring harnesses for power/programming and connection to sensor interface MAP Sensor interface box Diesel EGT pyrometer probe with 1/8” NPT compression fitting and 96” lead wire. 1.8m Hose with T-Piece to tap into vehicle’s manifold boost/vac hose K-Type thermo coupler Weld in mounting bung Mounting bracket with fasteners and P-Clip Warranty 2 Years Sensor(s) (Included) Boost EGT Interface Sensor (Optional) GS-UT-80 / GS-UT-120 / GS-OWT1-4 / GS-OWT1-8 Standby Current Draw 30mA Input (Operating) Voltage 6 - 16V Height (mm) 42 Weight (kg) 0.05
Be The First To Review This Product!
Help other ozled users shop smarter by writing reviews for products you have purchased.